EDAN SE-300 SE-300B 12-lead 3-channel ECG Machine with 90 Days Warranty Used in Good Working Condition

EDAN SE-300 SE-300B ECG machine used with good condition repair medical equipment

►Brief Description

The SE-300 3-channel electrocardiograph simultaneously collects 12-lead ECG signals. It displays the operation menu, ECG parameters, and ECG.
The 3-channel ECG waveforms can be viewed on the LCD screen and printed using a high-quality thermal recorder.
Automatic, manual, rhythm, USB print, and power-off modes are freely selectable.
The SE-300 operates on mains power or a built-in rechargeable lithium battery. Basic and net types are available as options for each model; only net types support network transmission. The DE12 ECG board is optional for all models. The DE12 ECG board provides the SE-300 with two additional DFT filter options (0.32 Hz and 0.67 Hz). The DE12 ECG board also enables the SE-300 to support full-fledged pacemaker detection.
Equipped with a high-resolution thermal recorder, a 32-bit processor, and large memory capacity, the SE-300 offers advanced performance and reliability. Its compact size makes it ideal for use in clinics, hospitals and ambulances.

►Specification

►Top Panel

►Features

1. Lightweight and compact
2. High-resolution thermal recorder with a recording frequency response of ≤150Hz
3. Simultaneous acquisition and amplification of 12-lead ECG signals, and simultaneous display and recording of 3-channel waveforms
4. Automatic, manual, rhythm, USB print, and power-off modes (optional)
5. Measurement and analysis functions (optional)
6. System setup interface for parameter setting
7. Built-in high-capacity rechargeable lithium battery
8. Displays information such as lead breaks, paper shortages, and low battery level
9. Automatic baseline adjustment for optimal printing
10. Standard input/output interface and RS232 communication interface

►Pre-Power-On Inspections

To avoid safety hazards and ensure a good ECG recording, we recommend performing the following inspections before powering on and operating the device.

1. Environment:
Ensure that there are no sources of electromagnetic interference around the device, especially large medical electrical equipment such as electrosurgery, radiology equipment, and magnetic resonance imaging equipment. Turn off these devices if necessary.
Keep the examination room warm to prevent muscle action voltages from appearing in the ECG signal due to cold.

2. Power Supply:
If using mains power, check that the power cord is properly connected to the device.
Use a grounded, three-prong outlet.

If the battery is low, charge it before use.

3. Patient Cable:
Check that the patient cable is securely connected to the device and keep it away from the power cord.

4. Electrodes:
Check that all electrodes are properly connected to the lead wires of the patient cable.

Ensure that the chest electrodes are not touching.

5. Recording Paper:
Ensure that sufficient recording paper is properly loaded.

Thank you for your attention, if you are interested in EDAN SE-300 SE-300B ECG machine used with good condition repair medical equipment, please contact us freely. wish you have a good life!

12-lead ECG Machine

3-channel Electrocardiograph

90 Days Warranty Medical ECG Equipment

EDAN SE-300 SE-300B 12-lead 3-channel ECG Machine with 90 Days Warranty Used in Good Working Condition Images