Mindray IPM-9800 Monitor SPO2 Plate 050-00046-00 051-000058-00
Mindray IPM-9800 Monitor SPO2 Plate includes two models: 050-00046-00 and 051-000058-00. The 050-00046-00 focuses on signal processing, while the 051-000058-00 focuses on interface drivers. Together, they form a complete blood oxygen monitoring unit, the core hardware for accurate SpO₂ and PR measurements. Their materials and circuit design fully meet the stringent requirements of medical equipment for stability, interference immunity, and safety.
Product Specifications
| Product name | SPO2 Plate |
| Model | Mindray IPM-9800 |
| PN | 050-00046-00 051-000058-00 |
| Circuit board material | medical grade FR-4 epoxy glass cloth laminate |
| Shipping time | Different |
| Deposit | 100% pay before shipping |
| Payment terms | Bank TT/ Paypal/Western Union |
| MOQ | 1 Piece |
| Size | 110mm*90mm*1.6mm |
| Weight | About 60g |
Core Functions
- Signal Acquisition and Preprocessing
- Blood Oxygen Saturation Calculation
- Probe Adaptation and Driver
- Probe Status Diagnosis
Frequently Asked Questions
Q1: The device displays "SpO₂ signal weak." I've checked the probe and it's fine. Is the oximeter board faulty?
A1: Turn off the power and check if the power cord is securely plugged in. After powering on the device, enter maintenance mode and check the oximeter board self-test results. If it displays "Signal amplification circuit abnormality" (fault code E04), the oximeter board is faulty and should be replaced.
Q2: Can the two oximeter boards be replaced separately? Or must they be replaced together?
A2: They can be replaced separately, depending on the fault type: ① If "Probe cannot be recognized" or "Drive current abnormality" occurs, it's likely that the 051-000058-00 board is faulty and can be replaced alone. ② If "Oximeter calculation error is large" or "Weak signal cannot be calibrated" occurs, it's likely that the signal processing chip or filter circuit on the 050-00046-00 board is faulty and should be replaced alone. ③ After replacement, power on the device and perform "SpO₂ calibration" to ensure measurement accuracy meets requirements.
Q3: The blood oximeter board gets noticeably hot while operating (approximately 65°C to the touch). Is this normal?
A3: It's not normal. The normal operating temperature should be ≤60°C. Possible causes of abnormal heating: ① The heat sink may have fallen off or the thermal grease may have dried out. Disassemble the device to inspect the heat sink on the 050-00046-00 board and reapply thermal grease (0.5mm thick). ② The driver chip is overcurrenting. Measure the probe LED current to see if it exceeds 80mA.
Product Images
Ordering Information
| Payment Methods | Bank Transfer / PayPal / Western Union |
| Shipping Methods | DHL / FedEx |
